Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Vacuum pump to engine | Torx screw, M6 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
|
Mounting for vacuum pump |
|||||
| Vacuum line to engine | Fastening screws | Tightening torque | 10 Nm (7.5 ftlb.) | ||
|
Mounting for vacuum pump |
|||||
| Heat shield (vacuum pump) to engine | Fastening screws, M6x 14 | Tightening torque | 10 Nm (7.5 ftlb.) | ||
|
Mounting for heat shield |
|||||