LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 9 (47 Brakes- Brake Hydraulic System, Regulator, Booster 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 471519 Removing And Installing Brake Master Cylinder >> Installing Brake Master Cylinder

Installing Brake Master Cylinder

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening nuts on brake master cylinder > Tightening torque 49 Nm (36 ftlb.) +/- 4 Nm (3 ftlb.)  .

    Fastening screw securing brake fluid reservoir to brake master cylinder > Tightening torque 8 Nm (6 ftlb.)  .

    Cap screws securing brake lines to brake master cylinder > Tightening torque 16 Nm (12 ftlb.)  .

scientia non olet · About LEMON Manuals