LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (30 Clutch, Actuation 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 304519 - Removing And Installing Release Bearing >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Check smooth operation of components on the transmission shaft and check that they are assembled correctly.
  2. Install transmission.

    > 343519 REMOVING AND INSTALLING TRANSMISSION

scientia non olet · About LEMON Manuals