LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (30 Clutch, Actuation 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 303019 - Removing And Installing Clutch Slave Cylinder >> Installing Clutch Slave Cylinder

Installing Clutch Slave Cylinder

WARNING: This page is about a different variant/trim than selected.
  1. Grease push rod in ball socket area of the release lever with Kluberalfa.
  2. Further installation is performed in reverse order to removal.

    Fastening nut for exterior shift mechanism > Tightening torque 23 Nm (17 ftlb.)  .

    Fastening screw for clutch slave cylinder > Tightening torque 23 Nm (17 ftlb.)  .

scientia non olet · About LEMON Manuals