LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (21 Exhaust Gas Turbocharging 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 214219 - Removing And Installing Holder For Charge Air Cooler >> Install Holder For Charge Air Cooler

Install Holder For Charge Air Cooler

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Screws for holder for charge-air cooler, M6: > Tightening torque 10 Nm  .

    M6 nut: > Tightening torque 6 Nm 

scientia non olet · About LEMON Manuals