LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (21 Exhaust Gas Turbocharging 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 214119 - Removing And Installing Pressure Pipe >> Removing Pressure Pipe

Removing Pressure Pipe

WARNING: This page is about a different variant/trim than selected.
  1. Release connection to the charge-air cooler.
    1. 1.1 Loosen spring clamp - - and disconnect pressure pipe by pulling it downwards -arrows-  .
    G14945739Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove pressure pipe.
    1. 2.1 Loosen clamp - - and pull hose - - off the pressure pipe.
    2. 2.2 Guide pressure pipe - - out of the engine compartment.
    G14945740Courtesy of PORSCHE CARS NORTH AMERICA, INC.