LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 7 (21 Exhaust Gas Turbocharging 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 213919 - Removing And Installing Moulded Hose >> Technical Values

Technical Values

WARNING: This page is about a different variant/trim than selected.
Location Description Type Basic value Tolerance 1 Tolerance 2
Screw-type clamp on moulded hose   Tightening torque 5.5 Nm + 0.5 Nm  
scientia non olet · About LEMON Manuals