LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (19 Engine - Cooling 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 197819 - Removing And Installing Coolant Temperature Sensor >> Removing Coolant Temperature Sensor

Removing Coolant Temperature Sensor

WARNING: This page is about a different variant/trim than selected.
G14944910Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation overview of coolant temperature sensor

WARNING: Caustic fluids 
  • Danger of chemical burns 
    • → Wear personal protective gear.
    • → Ensure that there is good ventilation.
    • → Avoid contact with caustic fluid.
    • → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
  1. Release electric plug connection -1-  on the coolant temperature sensor -2-  and disconnect it.
  2. Place a suitable coolant collection pan underneath.
  3. Unscrew coolant temperature sensor -2-  and collect emerging coolant.
    G14944911Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Coolant temperature sensor on coolant pipe