LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (19 Engine - Cooling 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 197819 - Removing And Installing Coolant Temperature Sensor >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Hot fluid 
  • Danger of scalding 
    • → Let the fluid cool down.
    • → Wear personal protective gear.
  1. Remove rear and center underbody panelling.

    > WM, 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY

    > WM, 519319 REMOVING AND INSTALLING COVER FOR CENTRE UNDERBODY

  2. Drain coolant at the rear coolant pipes.

    > 193817 DRAINING AND FILLING COOLANT