LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (19 Engine - Cooling 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 196419 - Removing And Installing Front Right Coolant Pipe >> Removing Front Right Coolant Pipe

Removing Front Right Coolant Pipe

WARNING: This page is about a different variant/trim than selected.
WARNING: Caustic fluids 
  • Danger of chemical burns 
    • → Wear personal protective gear.
    • → Ensure that there is good ventilation.
    • → Avoid contact with caustic fluid.
    • → If you do come into contact, wash off immediately with plenty of warm water and contact a doctor if necessary.
  1. Release coolant connection -1-  and pull coolant hose off the front right coolant pipe -2-  .
  2. Unscrew and remove fastening screw -3-  .
  3. Release coolant connections -4 and 5-  and pull coolant hoses off the front right coolant pipe -2-  .
  4. Unclip front right coolant pipe -2-  from holders -6 and 7-  and guide it out.
    G14944887Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front right coolant pipe