LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (19 Engine - Cooling 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 196419 - Removing And Installing Front Coolant Pipe At The Centre >> Installing Front Coolant Pipe At The Centre >> Installing Lower Front Coolant Pipe At The Centre

Installing Lower Front Coolant Pipe At The Centre

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screws > Tightening torque 10 Nm (7.5 ftlb.)  .

Installing upper front coolant pipe at the center 

  1. Installation is performed in reverse order to removal.

    Fastening screws > Tightening torque 10 Nm (7.5 ftlb.)  .

scientia non olet · About LEMON Manuals