Subsequent Work

WARNING: This page is about a different variant/trim than selected.

WARNING: Hot fluid

Danger of scalding
- → Let the fluid cool down.
- → Wear personal protective gear.

Install heat shield on catalytic converter.
> 261219 REMOVING AND INSTALLING HEAT SHIELD (ON CATALYTIC CONVERTER) .
Install catalytic converter.
> 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER .
Fill up coolant.
> 193817 DRAINING AND FILLING COOLANT .
Bleed the cooling system.
> WM, 190107 - BLEEDING THE COOLING SYSTEM
Visually check the cooling system for leaks.
Install cover for rear underbody.
> WM, 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY
Check engine coolant level after a test drive and when coolant has cooled down and correct it if necessary.