Preliminary Work
WARNING: This page is about a different variant/trim than selected.
- Remove engine.
- Remove generator.
- Remove belt tensioner.
- Remove directional-control valve for thermal management.
> 196819 REMOVING AND INSTALLING DIRECTIONAL-CONTROL VALVE FOR THERMAL MANAGEMENT
Information
The air-conditioning compressor does not have to be removed. It is sufficient to loosen it, as it must be lifted for removing the distributor housing.
The refrigerant lines remain connected!
- Loosen air-conditioning compressor.
> WM, 873419 REMOVING AND INSTALLING AIR-CONDITIONING COMPRESSOR