Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 1 |
|---|---|---|---|---|---|
| Transverse strut with stabilizer bearing to rear axle carrier side part | Item 1: M8 x 60 hexagon-head bolt/replace after each disassembly | Initial tightening | 20 Nm (14.8 ftlb.) | ||
| Cross strut with stabilizer bearing on rear axle carrier side part | Item 1: M8 x 60 hexagon-head bolt/replace after each disassembly | Final tightening | + 90° | ||
| Connecting link to anti-roll bar | Collar nut, M10/replace | Initial tightening | 40 Nm (29.5 ftlb.) | ||
| Connecting link to anti-roll bar | Collar nut, M10/replace | Final tightening | + 30° |