LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (42 Rear Wheel Suspension Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 425819 Removing And Installing Rear Wheel Bearing >> Tools

WM, 425819 Removing And Installing Rear Wheel Bearing: Tools

WARNING: This page is about a different variant/trim than selected.
Tool denomination Type Tool number Image
test card VW tool > T10473
G14947989Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Holding rails VW tool > VW457
G14947990Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pressure piece VW tool > VW454
G14947991Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Press-on sleeve Special tool > 9694/3
G14947992Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Separating device Vehicle-specific workshop equipment > VAS 6961
G14947993Courtesy of PORSCHE CARS NORTH AMERICA, INC.
supplementary set VW tool > T10230/14-16
G14947994Courtesy of PORSCHE CARS NORTH AMERICA, INC.
attachments VW tool > T10205
G14947995Courtesy of PORSCHE CARS NORTH AMERICA, INC.
Pressure piece VW tool > 30-205
G14947996Courtesy of PORSCHE CARS NORTH AMERICA, INC.