LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (42 Rear Wheel Suspension Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 425819 Removing And Installing Rear Wheel Bearing >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove rear wheel bearing housing and remove all add-on parts (see article on "Replacing rear wheel bearing housing").

    425219 REMOVING AND INSTALLING REAR WHEEL BEARING HOUSING 

scientia non olet · About LEMON Manuals