LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (42 Rear Wheel Suspension Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 425219 Removing And Installing Rear Wheel Bearing Housing >> Removing And Installing Rear Wheel Bearing Housing

Removing And Installing Rear Wheel Bearing Housing

WARNING: This page is about a different variant/trim than selected.

The procedure for removing and installing the wheel bearing housing is identical to the procedure for removing and installing the spring strut

> 427119 REMOVING AND INSTALLING REAR SPRING STRUT 

G14947981Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Wheel bearing housing is removed with spring strut fitted

If the wheel bearing housing, wheel hub or wheel bearing must be replaced, see appropriate Service Information .

scientia non olet · About LEMON Manuals