Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 1 |
|---|---|---|---|---|---|
| Strut to body | Item 1: Combination screw, AM 10 x 35/replace after every removal | initial tightening | 30 Nm (22.1 ftlb.) | ||
| Strut to body | Item 1: Combination screw, AM 10 x 35/replace after every removal | final tightening | + 90° | ||
| Strut to rear-axle cross member | Item 2: Hexagon nut M10x 1.5 | Tightening torque | 65 Nm (47.9 ftlb.) | ||
| Strut with support plate to rear axle carrier side part | Item 4: Hexagon nut 10x 1.5 | Tightening torque | 65 Nm (47.9 ftlb.) |