LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (42 Rear Wheel Suspension Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 420619 Removing And Installing Rear-Axle Cross Member >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Jack and raise the vehicle at the prescribed jacking points,

    > 4X00IN LIFTING THE VEHICLE

  2. Remove rear underbody panelling.

    > WM, 519419 REMOVING AND INSTALLING COVER FOR REAR UNDERBODY

  3. Remove struts,

    > 421320 REMOVING AND INSTALLING STRUTS 

  4. Remove support plate,

    > 421419 REMOVING AND INSTALLING SUPPORT PLATE  - article on "Removing"

scientia non olet · About LEMON Manuals