LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (24 Fuel System - Electronic Injection 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 246319 - Removing And Installing High-Pressure Pump >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Place a warning sign in a clearly visible position in the work area or on the vehicle > Example of a warning sign  .
    G14945834Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Relieve fuel pressure in the system.
    1. 2.1 Remove cover on the fuse carrier in the passenger compartment at the front left.
    2. 2.2 In row B  - -, pull out the (20-amp) fuse - - for the fuel pump.
    3. 2.3 Start the engine, wait until it cuts out and then re-insert the fuse.
    G14945835Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. Remove air cleaner housing.

    > 242519 REMOVING AND INSTALLING AIR CLEANER HOUSING  - "Removing".