LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (24 Fuel System - Electronic Injection 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 244219 - Removing And Installing Throttle Housing >> Installing Throttle Housing

Installing Throttle Housing

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.

    Coat the seal with a light coating of Kluber Syntheso Glep.

    Fastening screws on throttle housing >.

    Screw-type clamps on charge air hose > Tightening torque 5.5 Nm + 0.5 Nm  .

scientia non olet · About LEMON Manuals