LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (24 Fuel System - Electronic Injection 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 244019 - Removing And Installing Fuel Injector >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Highly inflammable or explosive materials 
  • Danger of fire or explosion 
    • → Avoid contact with hot parts or sources of ignition.
    • → Use suction to remove ignitable vapours.
    • → Attach warning sign in a clearly visible position.
    • → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
    • → Secure collection containers/vessels to prevent them from tipping over.
  1. Install fuel collection pipe.

    > 243020 REMOVING AND INSTALLING FUEL COLLECTION PIPE .

    Information 

    • When the work is complete, check that all aids and foreign objects (e.g. cloths, tools) are removed from the engine compartment. 
  2. Make sure there are no tools, foreign objects or aids in the work area. 
  3. Remove warning sign.
  4. Complete the vehicle.