LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 3 (24 Fuel System - Electronic Injection 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 244019 - Removing And Installing Fuel Injector >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
WARNING: Highly inflammable or explosive materials 
  • Danger of fire or explosion 
    • → Avoid contact with hot parts or sources of ignition.
    • → Use suction to remove ignitable vapours.
    • → Attach warning sign in a clearly visible position.
    • → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
    • → Secure collection containers/vessels to prevent them from tipping over.
  1. Place or hang a warning sign in a clearly visible position in the work area or on the vehicle.
    G14945807Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  2. Remove fuel collection pipe.

    > 243020 REMOVING AND INSTALLING FUEL COLLECTION PIPE .

  3. Spray fuel injector seats in the cylinder head with Caramba EDI special solvent for injectors and leave it to take effect.
scientia non olet · About LEMON Manuals