LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 25 (43 Leveling System, Air Suspension, Damper Control 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 433419 Removing And Installing Sensor For Body >> Subsequent Work

Subsequent Work

WARNING: This page is about a different variant/trim than selected.
  1. Calibrating body sensor.
    1. 1.1  Connect PIWIS Tester  to the vehicle and switch on the ignition.
    2. 1.2  Start diagnosis in the PIWIS Tester  and select vehicle.
    3. 1.3  Select the - PASM control unit  - in the control unit overview.
    4. 1.4  Select the - Maintenance/repairs  - menu
    5. 1.5  Perform Calibrate height sensors  function
    6. 1.6  Follow the information on the PIWIS Tester. 
scientia non olet · About LEMON Manuals