LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (48 Steering 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 485319 Removing And Installing Bellows For Steering-Gear Housing >> Information

WM, 485319 Removing And Installing Bellows For Steering-Gear Housing: Information

WARNING: This page is about a different variant/trim than selected.
NOTE: Water can leak in if sealing elements are damaged. 
  • Component can become damaged or may not function. 

    → Replace damaged sealing elements.

    → Check that sealing elements are fitted correctly.

The bellows -2- can be removed and installed when the power-steering gear is installed. 

G14948443Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Power-steering gear with tie rods (shown on the 991)

  1. Tie-rod ball
  2. Bellows
  3. Tie rod (ball joint)