LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 22 (48 Steering 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 482919 Removing And Installing Height Adjustment Switch >> Removing And Installing Height Adjustment Switch

Removing And Installing Height Adjustment Switch

WARNING: This page is about a different variant/trim than selected.
  1. Insert a screwdriver into the slit -1-  on the height adjustment switch -2-  .
  2. Unclip height adjustment switch -2-  . and loosen it -arrow-  until the electric plug connection is accessible.
    G14948435Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Loosening height adjustment switch

  3. Disconnect electric plug connection -1-  (-arrow-  )
    G14948436Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pulling off electric plug connection

  4. Installation is performed in reverse order.
scientia non olet · About LEMON Manuals