Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Connecting link to spring strut (shock-absorber pipe clamp) | M12x 1.5 thread | Tightening torque | 85 Nm (63 ftlb.) | ||
| Connecting link to anti-roll bar | Collar nut, M10x 1.5/always use new collar nut following removal | Initial tightening | 40 Nm (30 ftlb.) | ||
| Connecting link to anti-roll bar | Collar nut, M10x 1.5/always use new collar nut following removal | Final tightening | + 30° |