LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (40 Wheel Suspension Front Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 407819 Removing And Installing Connecting Link For Anti-Roll Bar >> Removing And Installing Connecting Link For Anti-Roll Bar >> Installing Connecting Link For Anti-Roll Bar

Installing Connecting Link For Anti-Roll Bar

WARNING: This page is about a different variant/trim than selected.

Information 

Banjo bolts must not be interchanged.

  1. Fit connecting link on anti-roll bar. > Initial tightening 40 Nm (30 ftlb.)  > Final tightening + 30° 
  2. Fit connecting link on spring strut. > Tightening torque 85 Nm (63 ftlb.) 
scientia non olet · About LEMON Manuals