Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Lower trailing arm to front-axle cross member Lower trailing arm to front-axle cross member | M12x 1.5 x 90 M12x 1.5 x 90 | Initial tightening Final tightening | 70 Nm (52 ftlb.) + 180° |
||
| Lower trailing arm to wheel bearing housing | Lock nut, M12x 1.5 | Tightening torque | 85 Nm (63 ftlb.) | ||
| Control arm (diagonal arm) to lower trailing arm | Hexagon-head bolt, M14x 1.5 and hexagon nut | Tightening torque | 160 Nm (118 ftlb.) |