LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 20 (40 Wheel Suspension Front Drive Shaft 2.5L -- 982 - BOXSTER/CAYMAN) >> SY, 408850 Eliminating Noise Symptoms - Reworking Front Spring-Strut Mount (Noises From Around The Dashboard/SY3015) >> Reworking Spring-Strut Mount >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Remove cover above the plenum panel

    > WM, 852219 REMOVING AND INSTALLING TECHNICAL EQUIPMENT SPACE COVER

  2. Clean the spring-strut mount if necessary.
  1. Apply grease -2-  as shown, in the outer area of the circlip -1-  .
    G14947893Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Applying sliding compound

scientia non olet · About LEMON Manuals