LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (10 Engine - Crankcase, Suspension 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 105219 - Removing And Installing Positive Crankcase Ventilation Line >> Subsequent Work >> Subsequent Work For Long Section

Subsequent Work For Long Section

WARNING: This page is about a different variant/trim than selected.
  1. Install pressure pipe.

    > 214119 REMOVING AND INSTALLING PRESSURE PIPE

  2. Install moulded hose at the bottom.

    > 213919 REMOVING AND INSTALLING MOULDED HOSE

  3. Install charge-air cooler holder.

    > 214219 REMOVING AND INSTALLING CHARGE-AIR COOLER HOLDER

  4. Install rear wall cover.

    > WM, 555919 REMOVING AND INSTALLING REAR WALL FLAP

Subsequent work for short section 

  1. Install intake manifold.

    > 212419 REMOVING AND INSTALLING INTAKE MANIFOLD

  2. Install the air cleaner housing.

    > 242519 REMOVING AND INSTALLING THE AIR CLEANER HOUSING

  3. Install rear wall cover.

    > WM, 555919 REMOVING AND INSTALLING REAR WALL FLAP