Removing Positive Crankcase Ventilation Line (Long Section)
WARNING: This page is about a different variant/trim than selected.
Installation positions of positive crankcase ventilation lines
- Positive crankcase ventilation line, long section
- Positive crankcase ventilation line, short section
- Oil separator
- Release positive crankcase ventilation line -1- at the plug-in couplings -2, 3 and 4- using a suitable tool and pull them off.
- Unclip positive crankcase ventilation line -1- from the retaining clip -5- on the air-conditioning compressor.
- Carefully guide out positive crankcase ventilation line -1-
.
Long section, shown on removed engine