LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (10 Engine - Crankcase, Suspension 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 105219 - Removing And Installing Positive Crankcase Ventilation Line >> Preliminary Work >> Preliminary Work For Long Section

Preliminary Work For Long Section

WARNING: This page is about a different variant/trim than selected.

Information 

The long section is on the right-hand side and connects the oil separator to the cylinder head cover on cylinders 1 and 2.

  1. Remove rear wall cover.

    > WM, 555919 REMOVING AND INSTALLING REAR WALL FLAP

  2. Remove charge-air cooler holder.

    > 214219 REMOVING AND INSTALLING CHARGE-AIR COOLER HOLDER

  3. Remove moulded hose at the bottom.

    > 213919 REMOVING AND INSTALLING MOULDED HOSE

  4. Remove pressure pipe.

    > 214119 REMOVING AND INSTALLING PRESSURE PIPE

scientia non olet · About LEMON Manuals