Subsequent Work
WARNING: This page is about a different variant/trim than selected.
- Only for cylinder bank 1-2
: Install heat shield for catalytic converter.
> 261219 REMOVING AND INSTALLING HEAT SHIELD (ON CATALYTIC CONVERTER) .
- Only for cylinder bank 1-2:
Install catalytic converter with cross tube.
> 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER .
- 2.1 Secure cross tube holder to cylinder bank 3-4 with collar nuts.
- 2.2 Secure catalytic converter holder to the cylinder head with screws.
- Remove engine from the > VAS 6095A - Engine and Gearbox Support
and fit it on > VAS 6832 - Master Gear unit elevating platform
.
> 1001IN TOOLS FOR REMOVING/INSTALLING UNITS AND WORKING ON ASSEMBLY SUPPORT .
- Mount transmission.
> 343527 REMOVING AND MOUNTING TRANSMISSION .
> 373427 REMOVING AND MOUNTING PORSCHE DOPPELKUPPLUNG (PDK) .
- Install the engine.
- Fill in engine oil.
- Checking engine-oil level.