LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 18 (15 Engine - Cylinder Head, Valve Drive 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 153919 - Removing And Installing Actuator For Camshaft Control >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Intake side of cylinders 3 and 4:  Remove intake manifold.

    > 212419 REMOVING AND INSTALLING INTAKE MANIFOLD

  2. Outlet side of cylinders 3 and 4:  Remove turbocharger.

    > 213019 REMOVING AND INSTALLING TURBOCHARGER (VTG)

    > 213019 REMOVING AND INSTALLING TURBOCHARGER

  3. Intake side of cylinders 1 and 2:  Remove directional-control valve for thermal management.

    > 196819 REMOVING AND INSTALLING DIRECTIONAL-CONTROL VALVE FOR THERMAL MANAGEMENT

  4. Outlet side of cylinders 1 and 2:  Remove catalytic converter.

    > 267319 REMOVING AND INSTALLING CATALYTIC CONVERTER