LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (28 Ignition System, PREGLOW System 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 287219 - Removing And Installing Knock Sensor >> Installing Knock Sensor

Installing Knock Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screw securing knock sensor to crankcase.> Tightening torque 23 Nm (17 ftlb.) 

scientia non olet · About LEMON Manuals