Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Camshaft sensor (phase sensor) to cylinder head | Aluminium screw, inner Torx, M6 x 14 - always replace screw | Tightening torque | 5 Nm (3.7 ftlb.) | + 0.5 Nm (0.4 ftlb.) | |
| Shield to cylinder head cover, cylinder bank 1-2 | External Torx screw, M6 x 12 | Tightening torque | 10 Nm (7.4 ftlb.) |