LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (28 Ignition System, PREGLOW System 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 283919 - Removing And Installing Camshaft Sensor >> Removing Camshaft Sensor

Removing Camshaft Sensor

WARNING: This page is about a different variant/trim than selected.

Information 

The procedure for removing and installing is described for one side as an example. The procedure for the other side is almost identical.

  1. Remove camshaft sensor -1  -.
    1. 1.1 Unscrew screw -2  -.
    2. 1.2 Release and disconnect cable plug -3  -.
    3. 1.3 Replace O-ring -4  -.
    G14946035Courtesy of PORSCHE CARS NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals