LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 17 (28 Ignition System, PREGLOW System 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 283919 - Removing And Installing Camshaft Sensor >> Installing Camshaft Sensor

Installing Camshaft Sensor

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order.
    1. 1.1 Replace  screw.
    2. 1.2 Tightening torque: > Tightening torque 5 Nm (3.7 ftlb.) + 0.5 Nm (0.4 ftlb.) 
scientia non olet · About LEMON Manuals