Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Fastening nut securing valve holder to body | Tightening torque | 3 Nm (2 ftlb.) | |||
| Front-axle support on front axle cross member and body | Hexagon-head bolt/hexagon nut (M10) | Tightening torque | 65 Nm (47.9 ftlb.) | ||
| Coolant pipes on front-axle support | Hexagon screw (M6) | Tightening torque | 10 Nm (7.4 ftlb.) | ||
| Brace plates and strut on underbody (body) | Hexagon-head bolt, M10 x 40, M10 x 55 and M10 x 70 | Tightening torque | 65 Nm (48 ftlb.) |