LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (20 Fuel Supply, Actuator 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 203819 - Removing And Installing Supply Line (Underbody) >> Installing Supply Line (Underbody)

Installing Supply Line (Underbody)

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Check that the fuel line connections are fitted securely.

    Fastening nut for holder for valve on coolant line for heater. > Tightening torque 3 Nm (2 ftlb.) 

scientia non olet · About LEMON Manuals