Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Engine on engine mount | Collar nut, M12 x 1.5 | Initial tightening | 40 Nm (30 ftlb.) | ||
| Tank vent valve to turbocharger, | M6 x 20 screw (2.0 l and 2.5 l only) | Tightening torque | 10 Nm (7.5 ftlb.) (7.4 ftlb.) | ||
| Tank ventilation sensor or dummy to intake manifold | Tapping screw | Tightening torque | 2 Nm (1.5 ftlb.) | + 0.5 Nm (0.3 ftlb.) | |
| Intake manifold to turbocharger | M6 | Tightening torque | 12 Nm (9 ftlb.) |