Installing Fuel-Level Sensor
WARNING: This page is about a different variant/trim than selected.
WARNING:
Highly inflammable or explosive materials
- Danger of fire or explosion
- → Avoid contact with hot parts or sources of ignition.
- → Use suction to remove ignitable vapours.
- → Attach warning sign in a clearly visible position.
- → Contain leaked media using non-flammable absorbent material and put it in a container designed for this purpose for disposal in accordance with local requirements.
- → Secure collection containers/vessels to prevent them from tipping over.
- Remove sealing ring on the fuel tank flange and replace it.
- Further installation is performed in reverse order to removal.
Screws securing battery console mounting to body > Tightening torque 23 Nm (17 ftlb.) .