LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (20 Fuel Supply, Actuator 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 201019 - Removing And Installing Fuel Tank >> Preliminary Work

Preliminary Work

WARNING: This page is about a different variant/trim than selected.
  1. Place protective covers on the vehicle.
  2. The amount of fuel left in the fuel tank must not be more than a quarter of the tank capacity! 

    Drain fuel.

    > 200317 DRAINING AND FILLING FUEL  - article on "Draining"

  3. Drain coolant.

    > 193817 DRAINING AND FILLING COOLANT - article on "Draining"

  4. Remove the battery.

    > 270619 REMOVING AND INSTALLING BATTERY - article on "Removing"

  5. Remove carbon canister.

    > WM, 20251900 - REMOVING AND INSTALLING CARBON CANISTER WITHOUT LEAKAGE DIAGNOSIS UNIT  or WM, 20251903 - REMOVING AND INSTALLING CARBON CANISTER WITH LEAKAGE DIAGNOSIS UNIT 

  6. Remove filler flap.

    > WM, 553719 REMOVING AND INSTALLING FILLER FLAP

  7. Remove front part of front wheel housing liner at the left and right.

    > WM, 505619 REMOVING AND INSTALLING FRONT WHEEL HOUSING LINER

  8. Remove front-axle cross member.

    > 400919 REMOVING AND INSTALLING FRONT-AXLE CROSS MEMBER - article on "Removing"