LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 15 (20 Fuel Supply, Actuator 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 200719 - Removing And Installing Filler Neck >> Installing Filler Neck

Installing Filler Neck

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Tank filler neck screws > Tightening torque 10 Nm (7.5 ftlb.) (7.4 ftlb.)  .

scientia non olet · About LEMON Manuals