Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location |
Description |
Type |
Basic value |
Tolerance 1 |
Tolerance 2 |
| Lower part of oil pan to upper part of oil pan |
Internal Torx, M6 x 25 (10.9) |
Tightening torque |
13 Nm (9.5 ftlb.) |
|
|
| Oil-level sender on heat shield to oil pan and coolant pipe holder |
Screw, M6 x 12 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|