Technical Values
WARNING: This page is about a different variant/trim than selected.
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| ATF heat exchanger to transmission | Aluminium screws, M6 x 12 - replace screws - medium setting | Initial tightening + yield strength | 2.4 Nm (2 ftlb.) | ||
| Heat exchanger to port plate | Aluminium screws, M6 x 12 - replace screws - medium setting | Initial tightening + yield strength | 2.4 Nm (2 ftlb.) |