LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (37 Automatic Transmission - Actuator, Housing 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 374019 - Removing And Installing Transmission Mount >> Installing Transmission Mount

Installing Transmission Mount

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screws securing gear support to transmission > Tightening torque + torque angle 30 Nm (22 ftlb.) + 40°. 

    Fastening screws securing transmission mount to body > Tightening torque 33 Nm (24 ftlb.)  .

scientia non olet · About LEMON Manuals