LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (34 Mechanical Transmission Actuator Housing 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 343019 - Removing And Installing Neutral Position Sensor, Mt >> Installing Neutral Position Sensor, Mt

Installing Neutral Position Sensor, Mt

WARNING: This page is about a different variant/trim than selected.
  1. Installation is performed in reverse order to removal.

    Fastening screws for neutral position sensor, MT > Tightening torque 5 Nm (3.7 ftlb.) +/- 0.5 Nm (0.4 ftlb.). 

scientia non olet · About LEMON Manuals