LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2019 >> 718 Boxster Base, Automatic DCT Trans >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (34 Mechanical Transmission Actuator Housing 2.5L -- 982 - BOXSTER/CAYMAN) >> WM, 341215 - Adjusting The Shift And Selector Cables >> Adjusting The Shift And Selector Cables

Adjusting The Shift And Selector Cables

WARNING: This page is about a different variant/trim than selected.
  1. Shift transmission to neutral.
  2. Release bayonet locks -1-  (-arrows-  ).
    G14946544Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  3. >9846 - Locking bridge-1-  must be fitted on the gearshift bracket -2-  .
    G14946545Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  4. Lock bayonet locks -2-  (-arrows-  ).
    G14946546Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  5. >9846 - Locking bridge-1-  must now be unclipped and removed.
    G14946547Courtesy of PORSCHE CARS NORTH AMERICA, INC.
  6. Start the engine and check that all shift positions function correctly.
scientia non olet · About LEMON Manuals